testo 410-2 - Pocket sized Vane anemometer
Overview
Ideal anemometer for air velocity measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors. Pocket sized testo 410-2 also measures humidity and air temperature. The anemometer can also accomplish the calculation of parameters such as dew point and wet bulb temperature, wind chill or Beaufort wind force – all at the touch of a button.
-
Measurement of air velocity, air temperature and humidity
-
Pocket sized handy anemometer with a permanently installed vane
-
Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force
-
Includes single-point averaging, max/min values and Hold function
Product Description
With its handy format, pocket sized vane anemometer testo 410-2 is extremely suitable for fast check measurements at ventilation grilles and outdoors. With the permanently installed vane (diameter 30 mm), you can even measure low air velocities from 0.4 m/s to 20 m/s.
The anemometer is equipped with Testo humidity sensor featuring long-term stability and with an NTC temperature sensor with a measuring range of -10 to +50 °C for inspecting the air conditions.
You can therefore use this to measure air temperature and humidity reliably. The anemometer testo 410-2 displays other parameters at the touch of a button: the dew point and wet bulb temperature as well as the Beaufort wind force and the wind chill temperature, which is the temperature perceived by a person due to wind-related cooling.
The anemometer offers useful accessories and functions
We have equipped the vane anemometer with a clip-on protective cap. This offers reliable protection if you are not using testo 410-2 straight away. During the measurement you can use the fitted wrist strap, which prevents the anemometer from falling.
Take a look at the useful functions offered by the anemometer testo 410-2:
Single-point averaging: calculation of the mean air velocity, for example at ventilation grilles (air outlets)
Hold function: enables the current measurement data relating to air velocity, humidity and air temperature to be recorded and compared with each other
Max/min values: displays the minimum or maximum values since the vane anemometer was last switched on or reset
Illuminated display: read off your readings quickly and easily, even if visibility is poor
Selectable units: air velocity: m/s, km/h, fpm, mph, kts and Beaufort; air temperature: °C, °F and wind chill; humidity: relative humidity, wet bulb and dew point temperature
Delivery Scope
testo 410-2 vane anemometer for measuring air velocity, humidity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.
General Technical Data | |
Weight | 110 g (with protective cap and batteries) |
Dimensions |
133 x 46 x 25 mm (incl. protective cap) |
Operating temperature | -10 to +50 °C |
Protection class | IP10 |
Battery type | 2 AAA micro batteries |
Battery life | 60 h (average, without display illumination) |
Storage temperature | -20 to +70 °C |
Temperature - NTC | |
Measuring range |
-10 to +50 °C |
Accuracy | ±0.5 °C |
Resolution | 0.1 °C |
Measuring rate | 0.5 s |
Humidity - Capacitive |
|
Measuring range |
0 to 100 %RH |
Accuracy | ±2.5 %RH (5 to 95 %RH) |
Resolution | 0.1 %RH |
Velocity - Vane | |
Measuring range |
0.4 to 20 m/s |
Accuracy | ±(0.2 m/s + 2 % of mv) |
Resolution | 0.1 m/s |