KL-91 Series Pressure Transducers

Special Price 0.00

Overview

Pressure Transducer for Ultra-Pure Water The KL-91 is a pressure transducer suitable for use in monitoring pressure of various high-purity fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid. The KL-91 is available in two construction type: inline or insertion. The body construction meets IP-65 requiremnents and EMC resistant the level of CE.

 
 

Product Description

The KL-91 is a pressure transducer suitable for use in monitoring pressure of various high-purity fluids. The superior design provides for minimal “dead volume” which reduces the potential for contamination of the measured fluid. The KL-91 is available in two construction type: inline or insertion. The body construction meets IP-65 requiremnents and EMC resistant the level of CE.

Features

• ± 1 % full-scale accuracy
• All PFA/PTFE wetted part construction and PTFE coating on Alumina Sensor
• No 'O'-ring seals or fill fluids
• Choice of end fitting: Flare, Pillar, 20S, or Tube

Material of Wetted Parts PFA / PTFE
Material of Non-Wetted Parts Polypropylene
Pressure Range  -15 to 80 psi
Allowable Maximum Pressure 120 psi
Temperature Coefficient  +/- 0.05 % F.S. / deg. C
Power and Supply Current 24 VDC* ± 10% ( 2 wire system )
10 ~ 24 VDC ( 3 wire system )
Analog Output 2 wire: 4 ~ 20 mA DC
( Load Resistance: 500 ? max. at 24 VDC )
3 wire: 1 ~ 5 VDC , 0 ~ 10 VDC
( Load Resistance: 10 k ? min. )
Accuracy ± 1% F.S.
Connection Sizes 1/4” , 3/8” , 1/2” , 3/4” , 1”
Operating Temperature Range 10 to 80°C
Operating Humidity Range 25 to 80% RH ( no condensation inside sensor )
Protection IP-65
Cable Length 2 m
Weight 180 g ( with cable )

High-purity DI water, and CMP slurry
Filtration condition monitoring
General pressure monitoring

Product DataSheets

Product Data Sheet